#Bass guitar fl studio full

Whether recording directly, through an amp, or a combination of the two, capturing a great bass sound can give you a truly solid foundation for you to build your music and your productions on. Recording bass guitarВ can be easy when you follow a few simple guidelines. Choosing how you want your bass recording to sound is a creative decision вЂ“ it depends on the direction that you want to take your production in. YouвЂ™ll be able to produce a whole spectrum of different bass tones by mixing and matching the setup and the style of playing. If youвЂ™re after a bright, aggressive tone with more note definition, try these tips:Д«ut if youвЂ™re after a rounder, more mellow tone try these tips: The range of tone that can be generated can vary between the sharp, aggressive style of rock and metal all the way to the softer, gentler tone of reggae and dub. The way the bass guitar is set up and played can have a big impact on the sound produced. Moving the mic towards the speakerвЂ™s edge gives a softer sound. Directing the mic towards the centre of the cone will emphasize the higher frequencies and give you a more aggressive sound. You can get good recordings with both cardioid and omnidirectional polar patterns. Moving the mic further away will give you more body and less definition. This will give you a solid tone with plenty of body, as well as nice definition of the notes played. When recording bass guitar with an amp, the best place for the microphone is between 1-3 feet away from the ampвЂ™s grill. The AKG D112 is probably the most popular of these mics вЂ“ itвЂ™s a large-diaphragm cardioid mic that can handle very high sound pressure levels, and itвЂ™s frequency response is geared towards capturing these low frequency sounds. There are mics out there that are specially designed for recording low-frequencies, with kick drums and bass amplifiers being the main two sources. A dynamic mic I always recommend to have in the home studio is the Shure SM58, and you can get pretty good results using it on a bass amp. Microphones for Recording Bass Guitar at HomeДynamic mics are definitely the best option, as they can handle the loud volumes of a guitar or bass amp. The best way forward is to record the DI signal for the low-end, and the amp (at a low volume) for the body of the sound. But caution has to be taken when doing this вЂ“ if the amp is driven at high volumes, the low frequencies can damage the speaker. The other option for recording bass guitar is to use a guitar amp. If youвЂ™re looking for an amp that you can crank up and record at high volume, amps of at least 50 Watts are recommended. These days you can find small practice combo amps for bass guitars starting around the $70 mark.Д«ut these amps wonвЂ™t be very powerful and so are best recorded at a lower volume. Buying separate amps and cabinets can be expensive though, and isnвЂ™t usually near the top of essential items for a home studio.ДЄ lower-budget option is the combo amp, which combines the amplifier and the cabinet speakers inside one unit. If you only have the option of recording directly, then you can use one of the many guitar emulation programsВ out there вЂ“ Guitar RigВ and AmplitubeВ are two examples.Д«ass amps and cabinets will have better low-end response compared to normal guitar amps, to cope with the low notes of the bass guitar and to give the instrument itвЂ™s punch. Ideally, the bass should be recorded both directly and through an amp at the same time to give you the best sound and tone possible.

But it doesnвЂ™t really catch the soundвЂ™s body вЂ“ this requires an amp.

Recording direct helps to capture the low end and the note definition of the bass guitar. Passive: the bass must first be connected to a DI box (helping to match impedance levels).

Active: the bass can be connected directly into your audio interface or mixing console.Having to use a DI-boxdepends on whether the instrument youвЂ™re using has passive or active pickups. There are a few different bass guitar recording techniques to think about:Д¬apturing the direct signal of the instrument is important when recording bass guitar.

#Bass guitar fl studio full

The bass is a powerful instrument, and the general aim when recording it is to capture the full weight and body of the instrumentвЂ™s low frequencies, along with the mid-frequencies that give the notes their attack and definition. Along with the drums, the bass forms the backbone of most songs and productions, so getting your bass sound right is a vital part of producing good music.Д¬ombined with the kick drum, when itвЂ™s used the bass guitar creates most of a songвЂ™s low-frequency content.

Recording bass guitar is very similar to capturing the sound of the electric guitar.